A Real Look at the Power, Voltage, and Size of These Radiators
We built these IR radiators for one reason: they fit SIPA and Sidel machines like a glove. From the older SBO models all the way up to the new Matrix lines, we’ve got you covered. Here’s the heart of it: these run on high voltage—usually 400V—to power up those high-wattage quartz tubes. That power is what gives you the intense heat you need for fast, clean PET blowing. And we size the tubes specifically for each machine, so the heat lands right where the preform needs it, no guesswork. A 400V, 2500W tube throws off serious heat. That’s the price of speed. So, you just need to make sure your machine’s cooling system is up to the task. We make the tubes to fit the existing chamber, so you’re not stuck re-engineering anything. It just works.
What’s Inside: Halogen, Coating, and the Right Plugs
Inside, you’ve got shortwave halogen tech sealed in a quartz tube. The halogen gas lets the filament run hotter and brighter without burning out fast. That means it heats up almost instantly. We also coat the quartz to focus the energy into the infrared band that PET absorbs best. It’s all about making the heat count. For the electrical side, we use standard, tough connectors like R7s and Sk15. These are industrial workhorses built for high current and high heat. They make the whole unit a simple drop-in replacement. You wire it up exactly the same way as the old one, no messing with the machine’s main harness. This thing is built to take the daily grind of the factory floor and keep delivering stable heat, cycle after cycle.
The Payoff: A Straight Swap for Your Sidel Machine
The whole point is simple: full compatibility with the Sidel series, no modifications needed. Whether you’re on an old SBO or a brand-new Matrix line, this radiator goes in with zero downtime. The geometry is right, and the mounting points line up perfectly. You get even, consistent heating across the preform. That means fewer rejects and steady cycle times. The halogen IR response is so fast, it keeps up with those high-speed blowing cycles without breaking a sweat. It’s a practical upgrade—more heat, reliable connections, and a design that just fits. Just keep one thing in mind: with that higher wattage comes more heat. Make sure you keep the cooling path clean and clear. Give it good airflow and a solid heat sink, and this lamp will run reliably, shift after shift. For SIPA and Sidel operators, it really is that easy. No re-engineering. Just performance.